Ecological recovery of vegetation at a former industrial sludge basin and its implications to phytoremediation

Examination of a former industrial sludge basin containing organic pollutants showed that the basin had undergone substantial ecological recovery through natural forces following the removal of surface water in 1982. Conventional phases of ecological recovery (plant invasion and succession) have occurred, but the structure of the biodiverse plant community (51 species and 22 families) was different from that at a recovering non-polluted disturbed site. Three plant species (Bermuda grass, mulberry, and sunflower) believed to be early invaders of the basin still persist in large numbers indicating that these species are well suited to cope with normal environmental stresses at this area (i.e. seasonal drought and flood) as well as organic pollutants. There was an indication that early invaders of the site fostered disappearance of contaminants thereby creating more favorable conditions for a broader spectrum of plants to grow. Vegetation analyses of naturally vegetated hazardous waste sites hold promise as a screening device for identifying plant species and management practices worthy of further phytoremediation investigations.     

沈阳市机动车排放污染控制

综述了沈阳市机动车的发展与现状 ,着重探讨了沈阳市机动车尾气给人民生活带来的危害和解决办法 ,讨论了问题的所在 ,并对未来沈阳机动车尾气治理提出建议。     

浅析城考指标"汽车尾气达标率"

根据城市环境综合整治定量考核指标"汽车尾气达标率"的定义、解释及其实施规定,结合实际,针对性地分析了客观存在的问题,并提出一些可行性建议。     

Decomposition analysis of the effects of vehicle safety technologies on the motor vehicle collision–related mortality rate from 1994 to 2015

Abstract

Objective: Though the mortality rate for motor vehicle collisions (MVCs) has been decreasing since the 1960s with the advent of the first federal seat belt laws in 1968, MVC remains a leading cause of death for individuals aged 1 to 44 years. The purpose of this study is to examine the effects of frontal (FABs) and side airbags (SABs) and electronic stability control (ESC) on the components of the MVC mortality rate.

Methods: The MVC mortality rate from 1994 to 2015 was separated into its components of exposure of vehicles, exposure of travel, collision density, injury incidence, and case fatality rate. Year was categorized on the availability of safety technology in vehicles: 1994–1997 (first-generation FABs mandated), 1998–2001 (sled-certified, second-generation FABs mandated), 2002–2006 (increasing prevalence of SABs and ESC), 2007–2011 (advanced airbags mandated), and 2012–2015 (ESC mandated, SAB in over 90% of vehicles, introduction of advanced safety systems). Relative contributions (RCs) of the components to changes in the MVC-related mortality rate were calculated as the absolute value of the component’s beta coefficient divided by the sum of the absolute values of all components’ beta coefficients. Negative binomial regression–estimated rate ratios (RRs) for the changes in the rate of each component by year category compared to the prior year category.

Results: Significant decreases in the MVC mortality rate were observed for 2007–2011 and 2012–2015. The decrease in 2007–2011 was due in most part to an 18% decrease in the injury incidence (RR?=?0.82, P?<?.0001, RC?=?63%), though there was a noted contribution by the decrease in vehicle miles traveled (RR?=?0.95, P?<?.0001, RC?=?15%). The continued decrease in mortality in 2012–2015 was due is most part to the 10% decreased case fatality rate (RR?=?0.90, P?<?.0001, RC?=?66%) because there was no significant change in the vehicle miles traveled and injury incidence.

Conclusions: The results of this study highlight the effects of vehicle safety technologies on the MVC-related mortality rate and can help direct prevention efforts. Through the study period, there was no meaningful contribution to decreases in the MVC-related mortality rate due to components related to exposure (i.e., vehicles per population and the rate of vehicle miles traveled), suggesting that prevention efforts at decreasing exposure prevalence would have little effect on the MVC-related mortality rate. Instead, prevention efforts should continue to focus on event-phase methods to decrease injury occurrence and mitigate injury severity during the collision.     

重污染天气应对工作中机动车污染减排措施研究

伴随着国民经济的高速发展,越来越多的人拥有了私家车,随之而来的天气污染问题也越来越严重。基于此,本文针对重污染天气应对工作中机动车污染减排措施进行研究。通过加强机动车尾气排放管理、发展太阳能汽车和推动公交出行这三个措施,带动广大市民参与到机动车污染减排的工作中。     

机动车尾气VOCs排放特征及减排措施研究

分析了机动车尾气挥发性有机物(VOCs)的排放特征,发现尾气VOCs排放具有明显的日变化和季节变化特征。不同区域不同车型机动车尾气VOCs成分谱略有差异,轻型汽油车尾气VOCs中芳香烃和烷烃含量较高,柴油车烷烃含量较高。尾气排放受机动车保有量、行驶里程、维护保养水平、行驶速度和燃油标准、排放标准等因素影响。从优先控制汽油车、加快机动车更新、采取本地化减排措施、加强多元管理措施、提高科研水平等方面提出了针对性的减排措施。     

A study on chest injury mechanism and the effectiveness of a headform impact test for pedestrian chest protection from vehicle collisions

This study was aimed at investigating the injury mechanism of pedestrian chests in collisions with passenger vehicles of various frontal shapes and examining the influence of the local structural stiffness on the chest injury risk by using the headform impact test at the chest contact area of the vehicle. Three simulations of vehicle to pedestrian collisions were conducted using three validated pedestrian finite element (FE) models of three pedestrian heights of 177 (AM50th), 165 and 150 cm and three FE vehicles models representing a one-box vehicle, a minicar and a medium car. The validity of the vehicle models was evaluated by comparing the headform acceleration against the measured responses from headform impact tests. The chest impact kinematics and the injury mechanisms were analyzed in terms of the distribution of the von Mises stress of the ribcage and in terms of the chest deflections. The chest contact locations on the front panel and the bonnet top were identified in connection to the causation of rib fractures. The risk of rib fractures was predicted by using the von Mises stress distribution. The headform impact tests were carried out at the chest contact area on the front panel and bonnet to examine the safety performance with respect to pedestrian chest protection. In simulations of the one-box vehicle to pedestrian collisions, the chest was struck directly by the frontal structure at a high velocity and deformed substantially, since a shear force was generated by the stiff windshield frame. The acceleration of the headform was related to the rib deflections. The injury threshold of the ribcage deflection (42 mm) corresponded to the headform average acceleration of 68 G. In the minicar collision, the chest was struck with the bonnet top and cowl area at a low velocity, and the deformation was small due to the distributed contact force between the chest and the bonnet top. Besides, the ribcage deformation was too small for bridging a relation between the headform accelerations and rib deflections. In the medium car collision, the deformation mode of the chest was similar to that in the minicar collision. The chest collided with the bonnet top at a low velocity and deformed uniformly. The deflection of the ribs had an observable correlation with the headform accelerations measured in the headform impact tests. The frontal shape of a vehicle has a large influence on a pedestrian’s chest loadings, and the chest deformation depends on the size of the pedestrian and the stiffness of the vehicle. The one-box passenger vehicle causes a high chest injury risk. The headform impactor test can be utilized for the evaluation of the local stiffness of a vehicle’s frontal structure. The reduction of the headform acceleration is an effective measure for pedestrian chest protection for specific shapes of vehicles by efficacy in modifying the local structural stiffness.     

Taking account of the role of safety on vehicle choice using a new generation of discrete choice models

In attitudinal studies safety often appears as an important attribute desired by consumers when buying a new car (Ben-Akiva and Lerman, 1985). However, economic models of vehicle choice usually neglect the role of safety. On the one hand, to capture the qualitative nature of safety and variables related to safety one should consider safety as an underlying construct in a context of latent variable models. The problem is that psychometric models that make use of latent variables do not necessarily provide a complete understanding of agent behavior and may lead to poor predictive power. On the other hand, discrete choice models - although a powerful tool to explain decision making based on utility maximization behavior - fail to include qualitative factors as explanatory variables of the decision process.In this paper, we explore how to model safety through a new generation of discrete choice models which simultaneously consider both a standard discrete choice model and latent causal variables. Using stated preference data concerning purchase intentions of low-emission vehicles in Canada, we test a hybrid choice model to explain consumers’ preferences for safety. Based on the results as well as on the hybrid choice modeling approach, we outline a general framework for the correct modeling of the adoption of safer vehicles and appreciation of safety equipment.     

机动车不同速度下外噪声变化与衰减关系研究

通过在机动车测试场进行单辆机动车行驶状况的实验,研究机动车车型大小、行驶速度快慢与噪声量大小的关系,同时研究不同距离下机动车行驶外噪声的衰减规律。数据结果显示,测试条件下,噪声量随着速度提升而增加,呈线性关系或对数关系;相同速度下,大型车的噪声量比小型车的高8.1～11.0dB;在一定距离范围内,距离每增加3.5m,机动车噪声量将衰减2.2～3.0dB。     

Evaluating the effect of vehicle impoundment policy on illegal construction and demolition waste dumping: Israel as a case study

Construction and demolition (C&D) waste dumped alongside roads and in open areas is a major source of soil and underground water pollution. Since 2006, Israeli ministry for environmental protection enacted a policy of vehicle impoundment (VI) according to which track drivers caught while dumping C&D waste illegally have their vehicles impounded. The present study attempted to determine whether the VI policy was effective in increasing the waste hauling to authorized landfill sites, thus limiting the number of illegal unloads of C&D waste at unauthorized landfill sites and in open areas. During the study, changes in the ratio between the monthly amount of C&D waste brought to authorized landfills sites and the estimated total amount of C&D waste generated in different administrative districts of Israel were examined, before and after the enactment of the 2006 VI policy. Short questionnaires were also distributed among local track drivers in order to determine the degree of awareness about the policy in question and estimate its deterrence effects. According to the study’s results, in the district of Haifa, in which the VI policy was stringently enacted, the ratio between C&D waste, dumped in authorized landfill sites, and the total amount of generated C&D waste, increased, on the average, from 20% in January 2004 to 35% in October 2009, with the effect attributed to the number of vehicle impoundments being highly statistically significant (t = 2.324; p < 0.05). By contrast, in the Jerusalem and Southern districts, in which the VI policy was less stringently enforced, the effect of VI on the above ratio was found to be insignificant (p > 0.1). The analysis of the questionnaires, distributed among the local truck drivers further indicated that the changes observed in the district of Haifa are not coincident and appeared to be linked to the VI policy’s enactment. In particular, 62% of the truck drivers, participated in the survey, were aware of the policy and 47% of them personally knew a driver whose vehicle was impounded. Furthermore, the drivers estimated the relative risk of being caught for unloading C&D waste in unauthorized sites, on the average, as high as 67%, which is likely to become a deterrent on its own. Our conclusion is that the VI policy appears to have a deterring effect on truck drivers, by encouraging them to haul C&D waste to authorized landfill sites. As we suggest, the research methodology implemented in the study and its results may help policy makers in other regions and countries, which experience similar environment enforcement problem, to analyze policy responses.